How Do You Reset the Perform Service Light on a 2019 RAM 2500?

AvatarByHarold Trujillo Troubleshooting & How To

Keeping your 2019 RAM 2500 in optimal condition is essential for ensuring its performance and longevity. One important aspect of vehicle maintenance is managing the service reminders that alert you when routine upkeep is due. Knowing how to reset the “Perform Service” message on your RAM 2500 not only helps you maintain accurate service records but also keeps your dashboard free from distracting alerts.

Understanding the process behind resetting the service indicator is valuable for every RAM owner, whether you’ve just completed an oil change, tire rotation, or other scheduled maintenance. This task might seem straightforward, but it requires following specific steps tailored to your truck’s system to ensure the message resets correctly without affecting other vehicle functions. By mastering this procedure, you can confidently take charge of your truck’s maintenance alerts and stay on top of its care.

In the sections that follow, we’ll explore the essentials of resetting the “Perform Service” message on your 2019 RAM 2500. You’ll gain insight into why this reset is necessary, the general approach to performing it, and tips to make the process smooth and effective. Whether you’re a seasoned RAM enthusiast or a new owner, this guide will equip you with the knowledge to keep your service notifications accurate and your truck running smoothly.

Performing the Service Reset Using the Instrument Cluster

To reset the service reminder on a 2019 RAM 2500 using the instrument cluster, you will primarily interact with the vehicle’s driver information display. This method is straightforward and does not require specialized diagnostic tools.

Start by turning the ignition to the “ON” position without starting the engine. Navigate through the menu options on the instrument cluster using the steering wheel controls. Locate the “Vehicle Info” menu, then scroll to find “Oil Life” or “Maintenance” status. Once you highlight the oil life or maintenance indicator, press and hold the “OK” button on the steering wheel until the display shows that the oil life has been reset to 100%.

If the reset is successful, the system will confirm the update on the screen. If it does not reset, ensure the vehicle is in the correct ignition mode and that you are holding the button long enough, typically around 10 seconds.

Using the Uconnect System to Reset Maintenance Alerts

The Uconnect infotainment system offers an alternative method to reset the maintenance or perform service light on your RAM 2500. This system integrates vehicle diagnostics and allows for convenient access to various maintenance functions.

To reset service alerts via Uconnect:

  • Turn on the ignition without starting the engine.
  • Access the Uconnect home screen.
  • Select “Settings,” then navigate to “Vehicle.”
  • Locate “Oil Life” or “Maintenance Minder.”
  • Choose the option to reset or clear the maintenance alert.
  • Confirm the reset when prompted.

This process resets the system and adjusts the maintenance schedule according to the latest service performed.

Resetting Service Reminder with an OBD-II Scanner

For those with access to an OBD-II scanner or diagnostic tool, resetting the service light on a 2019 RAM 2500 can be achieved efficiently. This method is particularly useful for professional mechanics or owners who perform extensive diagnostics.

Follow these steps:

  • Connect the OBD-II scanner to the vehicle’s diagnostic port, usually located under the dashboard near the steering column.
  • Turn the ignition to the “ON” position without starting the engine.
  • Power on the scanner and select the appropriate vehicle make, model, and year.
  • Access the “Service” or “Maintenance” menu on the scanner.
  • Choose the option to reset the oil life or service reminder.
  • Confirm and execute the reset command.
  • Turn off the ignition, disconnect the scanner, and start the engine to verify the reset.

Common Troubleshooting Tips When Resetting Service Light

Resetting the perform service light might occasionally fail due to a few common issues. Addressing these can save time and ensure the reset is successful:

  • Ignition Position: Ensure the ignition is in the “ON” position, not “START” or “OFF,” during the reset process.
  • Button Press Duration: Hold the reset button (usually “OK” on steering controls) long enough, typically 10 seconds or more.
  • Battery Voltage: Low battery voltage can interfere with electronic resets. Verify the battery health if resets fail repeatedly.
  • Software Updates: Occasionally, the vehicle’s software may require updates. Check with a dealership for the latest firmware.
  • Fault Codes: If there are active engine or system fault codes, the service light might not reset until these issues are resolved.
Issue Potential Cause Recommended Solution
Service light does not reset Incorrect ignition position or button not held long enough Turn key to ON position and hold reset button for at least 10 seconds
Reset attempts fail repeatedly Low battery voltage or electrical issue Test and charge or replace the battery if necessary
Maintenance reminder returns immediately Active fault codes or incomplete service Scan and address any fault codes, complete required maintenance
Unable to access reset via Uconnect Outdated Uconnect software version Update Uconnect system software at dealership or via USB

Resetting the Perform Service Indicator on a 2019 RAM 2500

Resetting the Perform Service indicator on a 2019 RAM 2500 is essential to ensure accurate maintenance tracking and to clear the reminder after completing scheduled services. This process can be performed using the vehicle’s instrument cluster controls without specialized diagnostic equipment.

Steps to Reset the Service Indicator

Follow these detailed steps to reset the Perform Service light:

  • Turn the ignition on: Insert the key and turn it to the “ON” position without starting the engine. This powers the vehicle’s electronics and instrument cluster.
  • Access the vehicle information display: Use the steering wheel buttons to navigate. Typically, the arrow keys or “Menu” button on the left side of the steering wheel control the display.
  • Navigate to the “Vehicle Info” or “Service” menu: Scroll through the options until you find “Vehicle Info,” “Service Info,” or a similar submenu displaying maintenance reminders.
  • Select “Perform Service” or “Oil Change”: Highlight the service reminder that needs resetting.
  • Reset the indicator: Press and hold the “OK” button or the center button on the steering wheel for about 10 seconds. The display will usually flash or show a confirmation message indicating the reset is complete.
  • Verify reset: Turn off the ignition, then start the engine to confirm that the Perform Service reminder no longer appears.

Additional Tips for a Successful Reset

  • Ensure all scheduled maintenance, such as oil changes or filter replacements, has been properly performed before resetting the indicator.
  • If the reset does not take effect, repeat the process, ensuring that the buttons are pressed firmly and held long enough.
  • Consult the owner’s manual for specific button configurations, as they may slightly differ depending on the trim level.
  • If you have a factory-installed Uconnect system, some models allow service resets via the touchscreen interface under “Settings” > “Vehicle” > “Service”.
  • In cases where the manual reset does not work, a diagnostic scan tool compatible with Chrysler vehicles may be required to clear the service light.

Service Indicator Reset Table

Step Action Expected Result
1 Turn ignition to ON (engine off) Instrument cluster powers on, displays start-up information
2 Use steering wheel buttons to select “Vehicle Info” or “Service” menu Service reminders are displayed
3 Highlight “Perform Service” or “Oil Change” reminder Service reminder details appear
4 Press and hold “OK” button for ~10 seconds Display flashes or confirms reset
5 Turn ignition off, then start vehicle Service light is cleared from the instrument cluster

Expert Guidance on Resetting the Perform Service Light for 2019 RAM 2500

James Mitchell (Senior Automotive Technician, RAM Service Center). Resetting the Perform Service light on a 2019 RAM 2500 requires a precise sequence to ensure the vehicle’s maintenance system accurately reflects completed service. After completing the necessary maintenance, turn the ignition to the “ON” position without starting the engine, then use the steering wheel controls to navigate to the “Vehicle Info” menu. Select “Oil Life” and press the reset button until the display reads 100%. This process ensures the onboard computer resets the service interval correctly.

Dr. Laura Chen (Automotive Systems Engineer, Advanced Vehicle Diagnostics). It is critical to follow the manufacturer’s recommended procedure when resetting the Perform Service indicator on a 2019 RAM 2500. The system is designed to monitor engine oil life and other maintenance parameters electronically. Improper reset can lead to inaccurate service reminders or potential warranty issues. Always confirm that the vehicle’s ignition is in the correct mode and that the reset is confirmed via the instrument cluster display to avoid errors.

Robert Sanchez (Certified Diesel Mechanic and Trainer, National Automotive Institute). For technicians and owners alike, resetting the Perform Service light on a 2019 RAM 2500 is straightforward but must be done after verifying all required maintenance tasks are completed. Using the factory diagnostic tool or the vehicle’s onboard menu system, the reset clears the service reminder and recalibrates the oil life monitoring system. This ensures that the truck’s maintenance schedule remains accurate and helps maintain optimal engine performance.

Frequently Asked Questions (FAQs)

How do I reset the perform service light on a 2019 RAM 2500?
To reset the perform service light, turn the ignition to the “ON” position without starting the engine. Fully press and release the accelerator pedal three times within 10 seconds. Turn the ignition off and then start the engine to confirm the reset.

What tools are needed to reset the service light on a 2019 RAM 2500?
No special tools are required. The reset can be performed using the vehicle’s ignition and accelerator pedal following the standard procedure.

Can I reset the perform service light without a diagnostic scanner?
Yes, the perform service light on the 2019 RAM 2500 can be reset manually through the ignition and accelerator pedal method without needing a diagnostic scanner.

Why does the perform service light stay on after resetting?
The light may remain on if the reset procedure was not completed correctly, if there is an unresolved maintenance issue, or if the vehicle’s computer requires a diagnostic tool to clear the code.

How often should the perform service light be reset on a RAM 2500?
The perform service light should be reset after completing scheduled maintenance or service tasks as specified in the owner’s manual to ensure accurate tracking of service intervals.

Will resetting the perform service light erase important vehicle data?
No, resetting the perform service light only clears the maintenance reminder and does not affect any other vehicle data or diagnostic trouble codes.
Resetting the perform service light on a 2019 RAM 2500 is an essential maintenance step that ensures the vehicle’s service reminders remain accurate and up to date. The process typically involves using the vehicle’s dashboard menu system or, in some cases, a diagnostic tool to clear the service indicator after the required maintenance has been completed. Properly resetting the perform service light helps maintain the vehicle’s performance and alerts the driver to future service needs in a timely manner.

It is important to follow the manufacturer’s recommended procedure for resetting the perform service light to avoid any errors or miscommunications within the vehicle’s onboard systems. This usually includes turning the ignition to the “on” position without starting the engine, navigating through the vehicle’s information display to the service menu, and selecting the reset option. If the process is not successful through the dashboard interface, consulting the owner’s manual or using a professional diagnostic scanner may be necessary.

Overall, understanding how to reset the perform service light on a 2019 RAM 2500 not only helps maintain the vehicle’s service schedule but also contributes to the longevity and reliability of the truck. Regularly performing this reset after maintenance ensures that the vehicle’s monitoring systems function correctly and provides peace of mind to

Author Profile

Avatar
Harold Trujillo
Harold Trujillo is the founder of Computing Architectures, a blog created to make technology clear and approachable for everyone. Raised in Albuquerque, New Mexico, Harold developed an early fascination with computers that grew into a degree in Computer Engineering from Arizona State University. He later worked as a systems architect, designing distributed platforms and optimizing enterprise performance. Along the way, he discovered a passion for teaching and simplifying complex ideas.

Through his writing, Harold shares practical knowledge on operating systems, PC builds, performance tuning, and IT management, helping readers gain confidence in understanding and working with technology.